The Results of 90 Minutes of Soldering!

The transition to lead free soldering in the electronics industry will reduce the strain on our environment. For the

Flux residue after 90 minutes of soldering

Flux residue after 90 minutes of soldering

operator using lead-free,  the hand soldering process got more dangerous. The lead in the solder wire is gone, but to get the solder wire to flow, more flux is required in the lead-free solder wire.

The higher temperature that is needed to create a solder joint of good quality using lead-free sol

der, will cause a stronger reaction within the flux and more particles will be created in the solder smoke. Lead-free soldering produces up to 250% more particles in the size 0.5-1.0 micron, which is the particle size that is most dangerous to inhale. In addition to particles, solder smoke can contain isocyanates, aldehydes and other unhealthy substances.

We performed the following test:

We soldered with lead-free solder wire and a fume extraction nozzle placed near the source. We mounted a small net inside the fume extraction nozzle.  Within 90 minutes, the net was totally clogged with soldering smoke particles.  See picture at right.

This test distinctly shows the importance of using a spot suction even when soldering once in a while or just a few hours per day.

The particles clogged in the net are mostly condensed residues from flux. Without a filter system these particles will partly be inhaled by the operator and the risk of occupational asthma is increased. The remaining residues will be spread over the work object and the workplace.

Weller fume extraction systems will catch and eliminate the dangerous particles and gases created in the soldering process.

About these ads

Tags: , ,

One Response to “The Results of 90 Minutes of Soldering!”

  1. Visual Proof of What Fume Extractors Eliminate From the Air | The All-Spec Current Says:

    [...] nice people over at Weller wrote an awesome post about the results of 90 minutes of soldering. It’s a great read if you are debating the expense of purchasing a fume extractor. The article [...]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


Follow

Get every new post delivered to your Inbox.

%d bloggers like this: